Wet End for LP200 and WP200
Complete replacement LX LP200 & WP200-II spa pump wet end with 2hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a WP200 or LP200 pump this wet end this is the only replacement for it, order with confidence.
This upgraded LP200 & WP200 LX pump wet end has been used by many hot tub brands over the years, American & Chinese spa manufacturers.
This is a complete LX LP200 & WP200 wet end so just bolts straight onto your motor and includes the following items:
- Impeller – 2hp
- Faceplate with 3x air bleed screws
- Housing (Rear Volute)
- All associated internal O’ Ring
- Wet End Rotation – All pump wet ends can be installed onto pump motors in three positions, 12 O’clock, 3 O’clock or 9 O’clock easily so that they can attach to your spas plumbing unions.
- Side Discharge – This means the inlet (suction) and outlet (Discharge) are offset from one another. When you look directly at the face of the wet end you will see that the outlet is positioned off to one side in comparison to the inlet regardless if the wet end has been rotated.
- Fitment – Wet end is attached by four bolts, unbolt these then trap the impeller inside the wet end housing, whilst the impeller is trapped go to the rear of the motor and use a large flat screwdriver on the motor shaft to undo the impeller (anti-clockwise) from the motor shaft.
- Frame Size -LX pumps do not go by the standard industry frame sizes so they are unique to each model.
