Waterway 56f 5HP Wet End Assembly (2×2)
Genuine direct replacement Waterway 56 Frame pump wet end with internal 5hp rated impeller and 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). This type of Waterway wet end is found on 2.5hp & 3hp Waterway Executive hot tub pumps here in the UK & Europe.
This complete Waterway wet end includes the following items:
- Impeller – 5hp
- Faceplate with 3 bleed screws
- Housing (Rear Volute)
- Ceramic mechanical shaft seal
- All associated internal O’ Rings
- Wet End Rotation – All pump wet ends can be installed onto pump motors in three positions, 12 O’clock, 3 O’clock or 9 O’clock easily so that they can attach to your spas plumbing unions.
- Side Discharge – This means the inlet (suction) and outlet (Discharge) are offset from one another. When you look directly at the face of the wet end you will see that the outlet is positioned off to one side in comparison to the inlet and not directly in-line.
- Fitment – Wet end is attached to the motor by four small 5/16″ bolts. Sold separately.
- These 5hp 56 Frame Waterway wet ends can be bolted onto any 6.3″ 56 frame motors used with Waterway pumps. Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from LX pumps.
