Meet the BP6013G1
- Overheat Fault Detection for Runaway Pumps / Stuck Relays
- Supports up to 3 kW Heater (50 Hz)
- Option to add 2 speed pump 3
- Quick heater connect power plug
- Wi-fi Ready
- Based on Balboa’s most popular model’s
- Press & Hold Buttons for ease of use
The BP601 is based on the BP500/600, this newer model can run up to a 3 kW heater (50Hz systems), supports an expander card to run another pump and has multiple panel jacks on the main board.
Includes Balboa’s patented overheat Fault Detection for runaway pumps or stuck relays. The new M7 Plus software design incorporates patented technology using a microprocessor to intelligently monitor the hot tub water temperature and detect a runaway pump or stuck relays. If a fault is detected, the system will automatically attempt to shut the power off to the tub to prevent any overheating. (BP501 only).
For serviceability, the new BP501/BP601 systems include a new single board configuration and have Balboas new quick connect heater system no more removing heater straps, just unplug the old heater and plug in a new one.
Wireless System Control
Now you can control your system wirelessly with ControlMySpa. With a few simple connections and some additional hardware you can have full control of your spa system. Get it on Google Play or available on Apple App store.
The BP601 works with all of Balboa’s TP and SpaTouch Panels
This Spa Pack comes with 825 Incoloy 3.0kW heater.
Controls: Circ Pump, Pump 1, Either Pump 2 or Blower.
- Number of Pumps: 2
- Circ Pump: Yes
- Blower: Yes
- Ozone: Yes
- Lights: Yes
- WiFi: Enabled
- Audio System: Enabled
These packs have a number of possible set ups. They are shipped in Set Up 1 mode so you may need to amend the dip switches on the PCB and the set up program within the topside controller according to your specific set up. Please refer to the tech sheet in the above associated documents. Some set ups may require an additional purchase of the BP2X-wire kit.
