Balboa GL2000 PCB Board
This PCB is used as a replacement for an existing GL2000 mach 3 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
- Power: Volts: 230 Hz:50
- Pump 1:Single or dual speed + circulation pump if required
- Pump 2: Single or dual speed (if no blower used)
- Pump 3 or Air Blower: (if pump 2 is single speed)
- Heater: Yes
- Extra port: Available only with the addition of an expander board
- Ozone: Yes
- Light: 12 volt
- Sensor style: M7 x 2
- Pressure Switch: No
- Dimensions: Length: 290 mm Height: 155 mm
- Compatible with: GL2000/1 mach 3 control box. Topside controls from the high spec ML range such as theML400, ML700 or ML900.Hot Tubs: Hydrospa Essence PCB SN HSEX2000 54234
(MUST NOT BE USED IN METAL BOX, FOR USE WITH PLASTIC BOX ONLY)
IMPORTANT INFORMATION:
Circuit boards and other computerised equipment are exempt from our returns policy if they have been opened or installed.
If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.
