Balboa Clim8zone Heat Pump
Balboa Clim8zone is an experience you won’t find anywhere else, the first of its kind, Clim8zone combines exclusive energy-efficient technology with the ability to heat and cool the spa water.
It’s the perfect heat pump to use with your existing Balboa and Gecko packs, unlike the other heat pumps on the market this is made specifically by the system provider and comes with 2 years warranty.
Features & Benefits
Unlike other spa heat pumps on the market, Clim8zone™ functions at low ambient air temperatures (-20ºC/-4ºF) in colder climates and is quiet at less than 50dbBA. With a Variable speed compressor and smart algorithm and fully integrated with the BP Systems using the same spa heating pump as the spa’s traditional electric element heater.
Features a typical energy efficiency (COP) of 5 to 10 times a traditional spa heater and may reach up to 15 times in certain operating conditions, using less energy to keep the water hot, providing smart savings. The Clim8zone allows the spa user to set the spa BP Control System to utilize the Clim8zone™ Heat Pump alone, the spa’s traditional electric element heater alone, or both simultaneously when necessary.
- Noise – 52-40 dB(A)
- Cabinet material – Galvanised steel (dark grey)
- Compressor – Rotary
- Refrigerant – R32
- Power supply – 230V/1ph/50Hz or 60HZ
- Condenser – Titanium tube in PVC shell
- Width – 850mm
- Depth – 407mm
- Height – 414mm
Temperature Modes
Clim8zone has four Temperature modes for heating/cooling spa water.
1. Heating Mode (default) – This mode only heats the spa water. All cooling with the CLIM8ZONETM unit is disabled.
2. Cooling Mode – This mode only cools the spa water. All heating with the CLIM8ZONETM unit is disabled.
3. Heating and Cooling Mode (default) – This mode heats and cools the spa water with the CLIM8ZONETM unit enabled.
4. Disabled
Speed Modes
Clim8zone had three speed modes
1. Auto Smart (default)
- For Heating or Cooling
- Uses Artificial Intelligence
- Variable Heating/Cooling capacity
- The CLIM8ZONETM computer automatically adjusts the compressor frequency up or down using an algorithm that is based on ambient air temperature and water temperature.
- This algorithm balances a best case in most conditions for efficiency and noise vs heating/cooling output of the CLIM8ZONE unit.
2. Manual High
- For Heating or Cooling
- Highest Heating Capacity
- Fastest Water Heating/Cooling
- Low COP (i.e. Low Energy Efficiency)
- High Compressor Frequency – Fixed, i.e. does not adjust based on environmental conditions
- The CLIM8ZONE unit Compressor Noise is Maximum
3. Manual Low
- For Heating or Cooling
- Lowest Heating/Cooling Capacity
- Slowest Water Heating
- High COP (i.e. High Energy Efficiency)
- Low Compressor Frequency – Fixed, i.e. does not adjust based on environmental conditions
- The CLIM8ZONE unit Compressor Noise is Minimum
Compatibility
Clim8zone is compatible with the following spa packs
BP Control Systems
The CLIM8ZONE unit is compatible with BP Control Systems that have one of the following agency prefixes and must have C8Z in the description on the identification label:
BP20
BP21
BP501
BP6
BP2
BP1
The agency prefix is noted on the control system identification label
Delivery is direct and takes approximately 5-7 days.
Save costs, cut down on bills and make the sensible choice, go with the manufacturer, not inferior, unproven Chinese alternatives.
