Balboa BP6013G1 PCB Board
The PCB should be fitted with all the dip switch settings the same as the faulty PCB being replaced. For correct installation, the PCB should be fitted by a qualified tradesman or electrician.
- Power: Volts: 230 Hz:50
- Pump 1:Single or dual speed pump + circulation pump if required.
- Pump 2 or Blower: Single
- Heater: Yes
- Ozone: Yes
- Light: 10 volt
- Compatible with: BP600/601 control box. Topside controls from the serial standard TP range such as the TP800, TP600, and TP400.
IMPORTANT INFORMATION:
Circuit boards and other computerised equipment are exempt from our returns policy if they have been opened or installed.
If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.
