Please Note:

Our Offices are closed from December 23rd till January 2nd. Any orders placed between will be dispatched on January 2nd

Need help with a hot tub repair? Need help?

FREE Delivery

Free DPD Delivery For Orders Over £60

Nationwide Delivery

Delivery right to your door

Pay Later

Spread the cost with Klarna

Balboa 3.0KW M7 Heater

£160.00

Out of stock


Balboa 3.0KW M7 Heater

  • Power- Volts:230 Hz:50 KW:3.0 Amps:11.5-12.0 HP
  • Sensor compatibility: M7 24″ x 2
  • Material spec: Incoloy 825
  • Required flow rate: 21gpm
  • Flow detection:M7 Technology by using a sensor at each end of the heater assembly
  • Compatible with: GS500, GS500Z, GS501, GS501Z (with 3.0KW on label only), GS501SZ, GS510, GS510S, GS510Z, GS510SZ, GS511SZ, GS523DZ, GL2000 mach 3, GL2001 mach 3 and more
  • Connections and fittings: Usually held in with two fixing studs, one at the top and one underneath. 2″ white plastic female sockets to connect to plumbing
  • Dimensions: Length:381 mm Diameter:50.8 mm Between terminals:31.75 mm Overall length complete: 495.3 mm
Share this product

Balboa 3.0KW M7 Heater

Please be aware you may find cheaper versions of this heater on the internet but they might possibly be fake and can cause expensive damage to your tub.

If you are unsure of which product you need then please don’t hesitate to contact us and speak to one of our Balboa trained engineers on 0115 9442211

Scroll for more information