AquaSparkle Non Chlorine Shock 1Kg

AquaSparkle Non Chlorine Shock 1Kg

AquaSPArkle non-chlorine shock treatment is ideal for regular application to spa and hot tub water to remove non-filterable, organic contaminants from hot tub water. These contaminants include perspiration, dead skin cells and other caused by simply using the hot tub. If not removed they will ultimately lead to dull, cloudy and possibly foaming water.

Because this product contains no chlorine or bromine hot tub use can resume immediately after application.

• Used to shock dose your hot tub, works with any sanitiser including chlorine and bromine
• Use weekly to prevent your water from deteriorating or to clear after heavy usage
• Add at a rate of 11g per dose for a 1,000 litre hot tub.
• Potassium Peroxymonosulfate
• Use weekly or after heavy spa use

Directions

1. Maintain PH Level within the ideal range of 7.2-7.6. If the level is not in this range, adjust.
2. Maintain Free Chlorine or Bromine level in spas of 3-5mg/l (ppm). If level is not in this range, adjust accordingly.
3. You can pre-dissolve in a clean plastic bucket at a maximum rate of 10g of product per 0.2 gallons (1 litre) of clean warm water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned on and preferably near water inlets to aid distribution. You can also add directly to the water with pumps on.
4. After shock treatment, allow at least 30 minutes before bathing.