Aqua-Flo XP2e 3HP 48f Wet End Assembly
Genuine complete replacement 48 Frame Aqua-flo XP2e wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This 3hp XP2e wet end fits all 48 frame sized Aqua-flo pumps/motors.
The best way to identify an Aqua-flo 48 frame wet end model regardless of its impeller size is they have a part number of 92770705 stamped into one of the four support legs on the rear of the wet end.
This 3hp Aqua-flo XP2e pump wet end has been used by many brands over the years. This exact wet end can be found on Aegean, Master Spa, Sunrise Spas, Artesian, Cal Spas, Clearwater, Coleman Spas, La Spas, Gulf Coast, Saratoga, Marquis Spas, Vita Spas and many more.
This complete Aqua-flo XP2e wet end includes the following items:
- Impeller – 3hp
- Faceplate with air bleed screw
- Housing (Rear Volute)
- Ceramic mechanical shaft seal
- All associated internal O’ Rings
- Wet End Rotation – All pump wet ends can be installed onto pump motors in three positions, 12 O’clock, 3 O’clock or 9 O’clock easily so that they can attach to your spas plumbing unions.
- Centre Discharge – This means the inlet (suction) and outlet (Discharge) are in-line with each another. When you look directly at the face of the wet end you will see that the outlet is positioned directly in-line with the inlet regardless of whether the wet end is rotated.
- Fitment – Wet end is attached to the US smooth body motor such as an Emerson Motors or US Motors, the bolts run through the inside of the motor from the back to the front.
- Union Size – This CMCP wet end has 1.5-inch union connections, the thread OD on both the inlet and outlet are 63mm.
